The Ultimate Firearms Destination for the Gun Lifestyle

Now Shipping: Magpul Pro 700 Chassis

At SHOT Show 2018, Magpul announced its Pro 700 chassis. This precision rifle chassis is a solution for shooters looking to build a rifle that is undoubtedly more functional and adaptable than one built from a traditional stock. As of today, the Pro 700 is shipping.

N11A9483 (2)

What separates the Pro 700 from a standard rifle stock can be found in its features. “We spent four years developing it, evolving it, and improving every aspect of its features and design,” said Magpul, “…and we went through a lot of prototypes and testing in the process.”

MAG802_BLACK_002

Magpul states:

The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance. Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left  out.”

Pro700_3

•  Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers optimally placed for comfort and aesthetics

•  Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt retainer insert for left or right hand actions using a 1/8” hex wrench

•  Folding stock with push-button activated durable cast 4140 steel hinge with  Melonite® finish is reversible for left or right folding capability with the use of a 5/32”hex wrench. A fixed stock adapter is available for a non-folding stock solution

MAG802_BLACK_007

•  Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles

•  An NVD clip-on mounting rail solution is available

•  Overall LOP adjustment range is 13.25″ – 15.125”

•  Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right for a total of 5 degrees

•  Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser

•  Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench

•  Injection molded polymer grip with 5-degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench

•  Additional grip option included with a more aggressive sweep and enlarged palm swell for the shooter that is more inclined to a less vertical grip interface (8 degree forward / 20 degree aft edge sweep)

MAG802_BLACK_004

•  Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels

•  M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)

•  Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines

•  Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers

•  Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance

BLK  –  FDE  –  ODG
MSRP:  $999.95
MAG802 MAGPUL®  PRO  700




To learn more about the Magpul Pro 700, go to https://www.magpul.com/featured/magpul-pro-700

Enter Your E-Mail to Receieve a Free 50-Target Pack from RECOIL!

NEXT STEP: Download Your Free Target Pack from RECOIL

For years, RECOIL magazine has treated its readers to a full-size (sometimes full color!) shooting target tucked into each big issue. Now we've compiled over 50 of our most popular targets into this one digital PDF download. From handgun drills to AR-15 practice, these 50+ targets have you covered. Print off as many as you like (ammo not included).

Get your pack of 50 Print-at-Home targets when you subscribe to the RECOIL email newsletter. We'll send you weekly updates on guns, gear, industry news, and special offers from leading manufacturers - your guide to the firearms lifestyle.

You want this. Trust Us.



One response to “Now Shipping: Magpul Pro 700 Chassis”

  1. david toler says:

    Are these chassis ever going to be able to be purchased again? I need one because my Zermatt Arms TL-3 is left bolt/right eject. Nobody but you makes a stock that would be a drop-in fit for that action.

Leave a Reply

Your email address will not be published. Required fields are marked *

View Comments

  • Are these chassis ever going to be able to be purchased again? I need one because my Zermatt Arms TL-3 is left bolt/right eject. Nobody but you makes a stock that would be a drop-in fit for that action.

Subscribe to the Free
Newsletter