The Ultimate Firearms Destination for the Gun Lifestyle

New CZ-USA Pistols – P-10S subcompact, P-10F full size, Bren 2Ms, and more

At SHOW Show 2019, CZ-USA showed off several new pistols and a bullpup conversion kit for the Scorpion.

The big news with CZ's P-10 line of striker-fired polymer guns is that three different sizes are now being manufactured here in the United States, in their facility in Kansas City. Offered in 9mm, the new full size and subcompact models sport 4.5- and 3.5-inch barrels and 19- and 12-round capacity, respectively, straddling the compact P-10C's 4-inch barrel and 15-round capacity.

The mag release has been updated and is swappable for wrong-handed shooters. The trigger retains the excellent feel that the P-10C is known for, and the slide is nitride finished.

The new P-10s feature optics-ready slides with a blank plate installed. Adapter plates for the Trijicon RMR and Leupold DeltaPoint are available now, along with co-witnessed and suppressor-height iron sights.

MSRP will be $577 for the P-10S and $590 for the P-10F. They'll come with two magazines and a blank plate for the optics mount.

The Bren 2 Ms is a pistol version of the Bren 2, essentially the next generation of the 805. It's available in 223 and 7.62×39 — while the 223 version feeds from AR-15 mags, the 7.62×39 version takes proprietary magazines. The good news is that the bolt will hold open when empty. You can choose from three different barrel lengths: 8, 11, and 14 inches in 223 and 9, 11, and 14 inches in 7.62×39.

The Bren 2 Ms is lightened, with an aluminum receiver and a carbon fiber composite lower. The new fore-end is modular and replaceable. It features an AR-style bolt release as well as another release inside the trigger guard. The non-reciprocating charging handle can be installed on the left or right side, and controls are ambidextrous. The rear plate is threaded to take a standard AR receiver extension, so you can easily attach a pistol brace. If you decide to SBR your Bren, you can install a stock instead or even replace the rear plate with a folding stock.

MSRP will be $1,799.

CZ Custom and Angus Hobdell are renowned for their work pumping out high-speed CZ pistols. Competitors who have wished that CZ Custom would build a Shadow from scratch should take a look at the A01-LD. CZ Custom machined its own frame for this pistol in Mesa, Arizona. It features a full-length, heavy dust cover, beavertail, undercut trigger guard, checkering, and magwell. The short-reset trigger is as smooth as you'd expect from CZ Custom, with double action mode at around 8 pounds and single action around 3 pounds. The hammer and sear are pinned in the frame.

The A01-LD comes with a fiber optic front sight, low profile rear sight, match stainless steel bull barrel, and two 19-round magazines. MSRP is $2,247.

Those who love CZ's Scorpion but always wished it was available in a bullpup configuration can rejoice. CZ collaborated with Manticore Arms to release a bullpup kit for the Scorpion. Simply disassemble your Scorpion, transfer the trigger group, and reassemble.

Available soon, MSRP will be $399.


Visit https://cz-usa.com/

Enter Your E-Mail to Receieve a Free 50-Target Pack from RECOIL!

NEXT STEP: Download Your Free Target Pack from RECOIL

For years, RECOIL magazine has treated its readers to a full-size (sometimes full color!) shooting target tucked into each big issue. Now we've compiled over 50 of our most popular targets into this one digital PDF download. From handgun drills to AR-15 practice, these 50+ targets have you covered. Print off as many as you like (ammo not included).

Get your pack of 50 Print-at-Home targets when you subscribe to the RECOIL email newsletter. We'll send you weekly updates on guns, gear, industry news, and special offers from leading manufacturers - your guide to the firearms lifestyle.

You want this. Trust Us.



Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe to the Free
Newsletter