At SHOT Show 2018, Magpul announced its Pro 700 chassis. This precision rifle chassis is a solution for shooters looking to build a rifle that is undoubtedly more functional and adaptable than one built from a traditional stock. As of today, the Pro 700 is shipping.
What separates the Pro 700 from a standard rifle stock can be found in its features. “We spent four years developing it, evolving it, and improving every aspect of its features and design,” said Magpul, “…and we went through a lot of prototypes and testing in the process.”
Magpul states:
The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance. Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left out.”
• Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers optimally placed for comfort and aesthetics
• Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt retainer insert for left or right hand actions using a 1/8” hex wrench
• Folding stock with push-button activated durable cast 4140 steel hinge with Melonite® finish is reversible for left or right folding capability with the use of a 5/32”hex wrench. A fixed stock adapter is available for a non-folding stock solution
• Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
• An NVD clip-on mounting rail solution is available
• Overall LOP adjustment range is 13.25″ – 15.125”
• Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right for a total of 5 degrees
• Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
• Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
• Injection molded polymer grip with 5-degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
• Additional grip option included with a more aggressive sweep and enlarged palm swell for the shooter that is more inclined to a less vertical grip interface (8 degree forward / 20 degree aft edge sweep)
• Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
• M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
• Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
• Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
• Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance
BLK – FDE – ODG
MSRP: $999.95
MAG802 MAGPUL® PRO 700
To learn more about the Magpul Pro 700, go to https://www.magpul.com/featured/magpul-pro-700
Arizona is hot but these suppressors are cool! Check out just some of the fun…
Introduction: Get Ready, Sharpshooters! Here’s your chance to enhance your shooting experience with a top-of-the-line…
Daniel Defense announced an update for the reported keyholing issue that the new Daniel H9…
The SIG P320/P365 is quickly becoming one of the easiest to customize pistols ever made!…
From charitable acts to damn good coffee, DD-214 is in the thick of it. Dark…
Two of the lowest priced 2011s style pistols on the market, the Tisas B9R Carry…
View Comments
Are these chassis ever going to be able to be purchased again? I need one because my Zermatt Arms TL-3 is left bolt/right eject. Nobody but you makes a stock that would be a drop-in fit for that action.