The Ultimate Firearms Destination for the Gun Lifestyle

Abel Suppressors: Short & Sweet

SHORT, CHUNKY, EFFECTIVE. THE BISCUIT IS EQUALLY AT HOME ON SBRS AND BOLT GUNS

Photos by Kenda Lenseigne

If someone is looking for their first can, we almost always steer them toward a .30 cal for maximum versatility. It seems the engineers at Abel are on the same page, as for the moment, that’s all they offer — which is a good thing. 

We got to spend some quality time with their Biscuit and Biscuit S models and can confirm they’re as good as anything out there, offering a lot of bang for the buck. 

Constructed of 17-4 precipitation-hardened stainless steel and featuring some of the nicest welds we’ve seen on any suppressor, they’re rated for use on 5.56 rifles down to 10.3 inches in barrel length and are claimed to withstand full-auto fire on shorties. 

At the other end of the spectrum, they’ll handle 300PRC from a 22-inch bolt gun, and we’d be surprised if 300 Norma wasn’t on the cards also. 

Both models are built around the industry-standard 1.375×24 HUB mount, meaning many other suppressor companies’ adapters will bolt right up. So, if you’re already invested in say, ASR or KeyMo brakes and flash hiders, they’ll fit your guns without much hassle. The Biscuit measures 1.8 inches in diameter instead of the usual 1.5, which means it achieves the same internal volume as skinnier cans, but in a shorter overall length. 

You might think that being a little chunkier, it might be more noticeable when viewed through a scope, and we’re glad to report that nope, the greater diameter is offset by the shorter length and it’s no more obtrusive in your field of vision.  

The Biscuit S pairs perfectly with the Hellion; it doesn’t add too much length while also improving the balance.

Of the two, our preference is for the Biscuit S. Yes, it’s louder. No way around that. But when paired with a firearm with a shorter OAL, such as the Springfield Hellion shown here, it really shines. 

In fact, the Biscuit S might just be the ideal bullpup can, as it keeps length to a minimum, adds just enough weight to the muzzle to offset the usual bullpup butt-heavy feel and, due to its low back-pressure design, allows the gun to operate on the normal gas setting. 

SPECS:

Abel Biscuit, Biscuit S

  • Caliber: .30
  • Length: 5.5, 4.7 inches
  • Weight: 13.5, 16 ounces
  • Material: 17-4 PH stainless
  • Mounting System: 1.375×24
  • URL: abelcousa.com

Enter Your E-Mail to Receieve a Free 50-Target Pack from RECOIL!

NEXT STEP: Download Your Free Target Pack from RECOIL

For years, RECOIL magazine has treated its readers to a full-size (sometimes full color!) shooting target tucked into each big issue. Now we've compiled over 50 of our most popular targets into this one digital PDF download. From handgun drills to AR-15 practice, these 50+ targets have you covered. Print off as many as you like (ammo not included).

Get your pack of 50 Print-at-Home targets when you subscribe to the RECOIL email newsletter. We'll send you weekly updates on guns, gear, industry news, and special offers from leading manufacturers - your guide to the firearms lifestyle.

You want this. Trust Us.



2 responses to “Abel Suppressors: Short & Sweet”

  1. Will Kiser says:

    Hello, I purchased two Biscuit S’s earlier this year and run them on 10.3 & 11.5″ gas AR’s while training / running drills. Over the course of 2k rounds they have become my favorite cans over my Chimera and Omega. Lighter, shorter and the non-existent gas blow back is amazing. FYI, you can order them in 556, 6.5, etc. not just 30cal. Both of mine are 556 and i highly recommend them to all shooters.

  2. Justin Mendenhall says:

    The best suppressors out there in my opinion! They mitigate the back-pressure better than any other can I’ve used.

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe to the Free
Newsletter