Guns New Seven Six Two Enhanced BCG from LANTAC Incoming June 12, 2016 Join the Conversation Texas-based purveyor of fine rifle parts and accessories LANTAC USA just released a new 7.62N bolt carrier group (BCG). Far from your run-of-the-mill BCG, LANTAC calls this an Enhanced Bolt Carrier Group, or E-BCG. The entire assembly is covered with UTC EXO Nickle Boron for reduced friction, and there are enlarged gas exhaust ports which should be extremely beneficial when using a suppressed 7.62N AR. Here's what they have to say about it. New Seven Six Two Enhanced BCG from LANTAC AR10 Full Auto Style for increased mass and lock time. Our new BCG is precision machined from 8620 Steel with a 9310 Precision Hard Ground, Magnetically Particle Inspected Bolt. The entire carrier assembly is NiB, Electroless Nickel Boron coated with the patented, advanced UCT EXO process, unlike standard NiB coatings. This offers extreme lubricity with a friction coefficient of .02 and surface hardness of 82-85 Rockwell C. The carriers patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier. This results in a system that runs flatter with a smoother energy pulse. In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel. The flared boss at the tail of the carrier enhances the BCG's position within the buffer tube at the time of cycling and allows for a flatter more controlled reciprocation of the assembly. All critical dimensions are hard turned / ground after heat treat. All E-BCG's feature the LANTAC CP-R360-H™ patent pending domed cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx). The ultra smooth head reduces wear within the upper receiver. The BCG's weight helps to increase lock time with smoother operation. Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly. The E-BCG's forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors. However, it should be noted that the E-BCG™ is not a complete solution for this issue and all rifles are different. ‘Over Gassed' guns will suffer to a larger extent from this problem. Further details include: Weight 1Lb 2.1oz Forward Porting, Enlarged Vents. Balanced flared boss. 8620 Carrier, Heat Treated, Hard Turned. MPI 9310 Bolt, Hard Turned / Ground. NiB UCT EXO Coating. CP-R360-H Domed Cam Pin Mil-Spec Gas Rings Mil-Spec Staked Gas Key Grade 8 Hardened Fasteners All Hard Chrome surfaces are to MIL-STD-171 22.214.171.124 Lifetime Warranty. Made in the USA. You can visit LANTAC online here Explore RECOILweb:FLIR Systems Acquires Armasight for $41 MillionPrometheus Design Werx InvictusSurviving SHOT ShowWhen The Going Gets Tough, Can Modern SUVs Hack It?