The Ultimate Firearms Destination for the Gun Lifestyle

War Rifle Re-Creation: OIF M4 Carbine

W170332 was the serial number of my M4 Carbine while I was in the Army. A number I will never forget. The carbine was nothing special, especially by today’s standards: a Colt M4 Carbine.

I received it brand new while stationed in Ft. Richardson Alaska with 3/509th PIR. We had Knights Armament Rail Integration Systems with covers and vertical foregrips.

We had carry handles which were quickly replaced with the MA Tech BUIS, and eventually, we all got brand new Aimpoint Close Combat Optics. PEQ2s and Surefire M952 flashlights were our icing on the cake.

Bear in mind this was all in the summer of 2005. All of this kit was cutting edge over ten years ago and we were the Army’s newest Airborne Brigade.

M4a1_clone02

Flash forward a decade and everything about that carbine is outdated. The advancement in weapons technology and accessory compatibility is incredible. When I left active duty my first AR15 had a free float rail and all of the latest Magpul goodies.

I used that carbine for several years and it wasn’t until recently that I found myself missing my old rifle. The number of new rifle and accessory manufacturers is staggering and with the current slump in sales, I am sure this number will dwindle.

However, this has provided the consumer with all the parts and pieces to fit practically any budget. After building and buying several AR15s I set forth to build a close enough replica of my issued carbine.

M4a1_clone07
M4a1_clone08

Folks have been building clone rifles for years but recently this has seen a surge. For me, it started when I received a Colt 14.5” upper receiver in a trade deal.

This was the start to my re-creating my issued M4 carbine. To keep from filing for an SBR, I permanently affixed a GEMTECH Quickmount to the end. This was not part of my carbine back in the day but I had to put something on there and it was the obvious choice.

I quickly asked around and found an old KAC RAS from a friend; he had an extra from his days in the guard. It even had the look (old, scratched, and generally abused).

A quick search on eBay found a KAC vertical foregrip (be aware of the seller and the item when buying these parts from eBay, the first VFG I received was a cheap knockoff and broke as soon as I mounted it to the rail).

I did purchase a MA Tech rear sight online that was new and in the package. Another friend of mine had his old stock from his issued rifle floating around in his garage, which he generously donated to the cause.
M4a1_clone01M4a1_clone04

Halfway through my deployment, we had a squad leader transfer to another platoon–so I called dibs on his ACOG to replace my Aimpoint CCO. The ACOG was a welcome upgrade while we patrolled the more rural areas of Iraq. I was able to find a used ACOG at a local shop that wasn’t too outrageous.

My issued PEQ2 proved more difficult to obtain. I thought of getting an Airsoft replica but decided it would be best to just go with a DBAL. That falls into the realm of “close enough.” After all, I do want this to be a gun that I will actually grab and use.

The old issued Surefire 951 light was great back in the day but damn if it isn't huge and heavy. As luck would have it, one day while I was on the way to the chow hall on Camp Fallujah I found a Surefire Scout light! Let this be a lesson to all why tie downs are so important.

I swapped to this light to help save some weight and have continued to use one to this day.

M4a1_clone06
M4a1_clone03

The lower receiver I am using is by Anderson Manufacturing. I know, blasphemy for such a project. I just have not bit the bullet yet to buy a factory Colt lower receiver. I suspect one will be in my future as long as Brownell’s continues to keep them available.

In the meantime, the Anderson does have a horse on the side, so it counts right?

M4a1_clone05

I dug my original Spec Ops Brand Mamba three-point sling out of a box and put it on. I had modified it back then to just be a two-point sling, which even with its simplicity is still much better than a three point. I should swap it out for a more user-friendly and advanced system like a Blue Force Gear but nostalgia gets the better of me.

M4a1_clone10

It is easier to put together clone rifles today than ever. Brownells is an excellent resource for clone parts as well as forums and auction sites. FN now offers the Military Collector line, which includes several of the parts I listed. Colt has introduced a budget rifle- if the brand is more important to you.

Both are great starting points for this type of build and should help bring back old memories or fill a gap in your collection.

If you're interested in such a venture, here's a price breakdown that includes MSRP, street price, and what I ended up paying. You may find that you have a number of the needed parts in a seabag someplace or have a friend that does.

If your “good enough” is more particular than my “good enough,” some prices are going to change.
M4a1_clone09

DETAILS:

  MSRPStreet PricePaid
Rifle LE6920-OEM1$849.00$750.00$400 (upper only)
[Lower]Complete Lower[$160][$130]$100.00
RailKAC M4 Carbine RAS$248.74$165.00On Hand
LightSurefire M600 Scout$299.00$200.00$200.00
IR Laser DBAL- A3 Class 1$1,239.99$1,239.99$1,239.99
Optic Trijicon ACOG TA-01$1,250.00$725.00$750.00
SlingSpec Ops Brand$40.00$20.00On Hand
Sling PartsColt Side Sling Swivel$46.00$30.00On Hand
     
Totals: $3972.73$3129.99$2,689.99

Enter Your E-Mail to Receieve a Free 50-Target Pack from RECOIL!

NEXT STEP: Download Your Free Target Pack from RECOIL

For years, RECOIL magazine has treated its readers to a full-size (sometimes full color!) shooting target tucked into each big issue. Now we've compiled over 50 of our most popular targets into this one digital PDF download. From handgun drills to AR-15 practice, these 50+ targets have you covered. Print off as many as you like (ammo not included).

Get your pack of 50 Print-at-Home targets when you subscribe to the RECOIL email newsletter. We'll send you weekly updates on guns, gear, industry news, and special offers from leading manufacturers - your guide to the firearms lifestyle.

You want this. Trust Us.



One response to “War Rifle Re-Creation: OIF M4 Carbine”

  1. Harold Littell says:

    Got a Colt 6921 a couple of years ago for the same reason. Factor SBR. I only need the PEQ-15, why didn’t you get the one like we were issued but class 1. I use it for Governor’s 20/TAG match practice.

Leave a Reply

Your email address will not be published.

Subscribe to the Free
Newsletter