The Ultimate Firearms Destination for the Gun Lifestyle

New FN 509 Threaded Barrel & Failure Resistant Extractor from Apex Tactical

The FN 509 series of pistols appear to be gaining ground in the aftermarket with Apex Tactical announcing they are shipping aftermarket FN 509 threaded barrels from Apex Tactical. In addition to the threaded barrels, Apex is also shipping their FN 509 Failure Resistant Extractor in addition to the already available  FN 509 Action Enhancement Kit and the Fn 509 / FNS Compact Disassembly Fixture.

New FN 509 Threaded Barrel

With both the base model FN 509 and the FN 509 Midsize both shipping with non-threaded barrels, there haven’t been a lot of options to run a suppressor or compensator on those models until now, beyond finding an FN 509 Tactical barrel. Apex says that their barrel will not only add 1/2 x 28 threads, but it should also increase the level of accuracy your pistol is capable of.

Apex coated the stainless barrel in a black melonite finish and cut in some contrasting stainless flutes for some pizzaz but the biggest bonus is that Apex is including an OEM reduced power spring with every barrel. As of the time, this is being written, this is the only way to get a reduced power spring– short of buying a new gun.

Apex Tactical’s threaded barrel for the FN 509 has an MSRP of  $219.95 and can be found on the Apex Tactical website.

More from Apex Tactical:

Apex Tactical Specialties is now shipping its latest addition to its pistol barrel lineup – a new threaded barrel for the FN 509 model pistols. The new barrel is available now.

Designed specifically for the FN 509 model pistols with a factory 4.00” barrel, the Apex 9mm Threaded Barrel is machined from heat treated stainless steel. Each barrel is then black Melonite finished before it’s machined a second time to add contrasting stainless flutes.

The twist rate is 1:10” for improved accuracy performance and the thread pattern is 1/2-28. Each barrel comes with a thread protector and a light recoil spring assembly for use when shooting with a comp. As a direct drop-in, the barrel requires no fitting.

The Apex Threaded Barrel for the FN 509 can be ordered at ApexTactical.com. Also available for purchase is Apex’s full line of Action Enhancement Kits for the FN 509, FNS and FNS Compact model pistols.

Features and Specifications:

  • For 9mm FN 509 Pistols
  • Replaces 4.00” Factory Barrel
  • Stainless Steel
  • Black Melonite Finish with Contrasting Stainless Flutes
  • 1:10” Twist Rate
  • 1/2–28 Thread Pattern (thread protector included)
  • Light Recoil Spring Assembly (included)
  • No Fitting Required
  • Apex Part #: 105-072
  • MSRP: $219.95

Apex FN 509 Failure Resistant Extractor

Keeping in line with Apex’s product line and responding to customer requests, they are also shipping an FN 509 version of their Failure Resistant Extractor made from heat treated stainless steel.

The part is wire EDM cut using the same extractor hook geometry that Apex uses on their proven M&P extractor then coated in Black Nitride.

The Failure Resistant Extractor for the FN 509 from Apex Tactical has an MSRP of $45.95 and is available on the Apex website now.

More from Apex Tactical:

Apex Tactical Specialties is pleased to announce that its newest addition to the Failure Resistant Extractor line, designed specifically for the industry’s most popular striker-fired pistols, including the FN 509, is in-stock and now available.

The new extractor, designed only for use in the FN 509 model pistols, is machined from a billet of heat-treated stainless steel. The critical engagement surface features Apex’s custom extractor hook geometry, which is machined by wire EDM. The extractor is Black Nitride finished for enhanced durability and consistent, reliable extraction.

The Apex Failure Resistant Extractor for the FN 509 can be ordered at ApexTactical.com. This and other upgrade components for the FN 509, including Action Enhancement Kits and the FN 509/FNS Compact Disassembly Fixture, are also available for order.

Features and Specifications:

  • Replaces factory extractor
  • Features Apex’s custom extractor hook geometry
  • Provides consistent, reliable extraction
  • Works with all current FN 509 model pistols
  • Easy to install (Install Video)
  • Apex Part #: 119-168
  • MSRP: $45.95

Subscribe to the Free
Newsletter